Spun Pile, Pole Automatic Production Line

Tensioning nut:Tr80-Tr140 ,Material  40Cr

Tensioning screw rod: Tr80-Tr140  Material 40Cr

Thickness 40mm,material 40cr forging parts

Cement Screw Machine

Mixing Plant

Blender

The running wheel of the bottom mold is clamped by the mechanical claw driven of the oil cylinder, and then another set of oil cylinders are used to turn the bottom mold over at a certain angle, and the pole is tipped out from the bottom mold.

Used to turn the upper mold upward at a certain angle to facilitate cleaning of the mold.

Spinning machine is composed of base, support wheel, bearing seat, motor, control cabinet and drive shaft, adopting the principle of centrifugation, to achieve the rapid prototyping of spun piles and poles. The standard 8 groups of spinning machines can produce 15M spun pile with maximum length, which is the key equipment in the production process of electric poles.

The strip steel with fixed length cut by cutting machine is rolled into an arc shape by the rounding machine to facilitate the welding of the steel strip joint.

Adopt pneumatic control technology, make the pile sleeve hoop is set on the groove of the end plate, automatically rotating, and riveted with a press knife, improve production efficiency.

Adopt pneumatic control technology, without man-machine contact, to ensure the safety of operation, improve production efficiency.

Hydraulic control technology, high cutting pressure. Simple structure, safe and reliable, and high production efficiency.